Revision as of 13:38, 3 April 2019

Guides and Manuals

Do not operate sander without dust collector connected to the dust cover.
Always disconnect power before servicing or adjusting.
Take light passes. Make sure to go slow and light if the material is hard like maple.

We have reels of sandpaper that is meant to be cut in to specifically shaped strips. To cut a new strip, you must either use an existing and known good strip as a template, or cut to a specific length and use a wooden template to cut the angle on the ends.

@@ Line 1: / Line 1: @@
+[[File:DrumSanderParts.png|400px|thumb]]
 =Guides and Manuals=
 *[https://drive.google.com/open?id=1UZbaiMd6UyRId5Hwvl33-eS3QnrzAi2W Drum Sander 19-38 Supermax]
+[[File:DrumSanderParts.png|380px]]
 =General Tips and Safety=
-*
-*Always wear eye protection while operating sander.
-*Always feed boards against the drum rotation.
-*Tighten all locks before operating.
-*Keep hands and clothing away from operating drum.
-*Do not operate sander with dust cover opened.
 *Do not operate sander without dust collector connected to the dust cover.
-*Always maintain control of boards to avoid kickback (know how to prevent it).
 *Always disconnect power before servicing or adjusting.
+*Take light passes. Make sure to go slow and light if the material is hard like maple.
 =About our machine=
-*
+*We have reels of sandpaper that is meant to be cut in to specifically shaped strips. To cut a new strip, you must either use an existing and known good strip as a template, or cut to a specific length and use a wooden template to cut the angle on the ends.
-*
 =Helpful Videos=
-*
+*[https://www.youtube.com/watch?v=G5_GPFoZtXg How to Change Abrasive Wraps on a Drum Sander] - SuperMax Tools
-*
+*[https://www.youtube.com/watch?v=ywHPvidIffw Woodworking Tips: Versatility of Surface Sanders]
-=Tooling=
-*
-*
 =Maintenance=
-*
+[[File:DrumSanderWrapDimensions.png]]
-*