Difference between revisions of "20 Inch Planer"
Jump to navigation
Jump to search
m (AlexN moved page 15 Inch Planer to 20 Inch Planer: upgraded tool) |
|||
| Line 1: | Line 1: | ||
=Info and Guides= | =Info and Guides= | ||
*[https://drive.google.com/ | *[https://drive.google.com/file/d/1ccqhJzjlQAdRbPZIwRKArEi4xwMfoNc3/view?usp=sharing Powermatic 20" Planer Manual] | ||
* | * | ||
=How to operate= | =How to operate= | ||
Revision as of 12:23, 24 October 2020
Info and Guides
How to operate
- Connect the dust collection hose
- Set the height of the table. Your board should pass just underneath the metal plate in the middle
- If your board is particularly long, set up support rollers on the infeed and outfeed sides to match the current height
- Turn the dust collector on
- Turn the planer on
- Feed your board in straight until the rollers grab it and start to pull it
- Move towards the outfeed side to support the end of it as it comes out
- Once the board has exited the planer, carry it back to the in feed, adjust the height either an eight of a turn or a quarter of a turn
- Make another pass, and repeat steps 6 through 8 until the board is the desired thickness
- Turn off the planer and dust collector. Sweep up any chips around the planer. You can leave the dust collection hose connected
Rules
- NO RECLAIMED LUMBER IN THIS PLANER. Talk to Alex or Jeff about using the Dewalt planer.
- DO NOT RUN NAILS, STAPLES, OR ANY NON-WOOD OBJECTS THROUGH THIS PLANER
- If you put excessive wear on the blades you will be expected to pay for sharpening or new blades.
- Take light passes on harder woods (1/8 turn)
- Each pass should be no more than a quarter turn, or 1/32" deep
Useful Videos
How to Use a Surface Planer | Woodworking - Howcast on Youtube