Difference between revisions of "Drill Press"
Jump to navigation
Jump to search
m |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File: | [[File:powermaticDrillPress.jpg|300px|thumb|Wood Shop Drill Press]] | ||
[[File:Drill Press 17-965.jpg|300px|thumb|Metal Shop Drill Press]] | [[File:Drill Press 17-965.jpg|300px|thumb|Metal Shop Drill Press]] | ||
=About our machines= | ==About our machines== | ||
We have 2 drill presses for our Wood Shop and Metal Shop. One is just for wood, the other just for metal, to help keep the oily metal chips and wood chips separated. | |||
Wood Shop Drill Press: | Wood Shop Drill Press: | ||
*Model: Powermatic PM2800B | *Model: Powermatic PM2800B | ||
| Line 12: | Line 13: | ||
=Guides and Manuals= | ==Guides and Manuals== | ||
*[https://drive.google.com/file/d/1d9hbVzvxWL1a9c8ZecjXzssmrSgBDik_/view?usp=sharing Powermatic Drill Press Manual] - Wood Shop | *[https://drive.google.com/file/d/1d9hbVzvxWL1a9c8ZecjXzssmrSgBDik_/view?usp=sharing Powermatic Drill Press Manual] - Wood Shop | ||
*[https://www.youtube.com/watch?v=raLYRGDsILA Powermatic PM2800B Safety Video #1] '''- required to watch before operating''' | |||
*[https://www.youtube.com/watch?v=raLYRGDsILA Powermatic PM2800B Safety Video #1] | *[https://www.youtube.com/watch?v=T2rb3DUieX4 Powermatic PM2800B Safety Video #2] '''- required to watch before operating''' | ||
*[https://www.youtube.com/watch?v=T2rb3DUieX4 Powermatic PM2800B Safety Video #2] | |||
*[https://drive.google.com/file/d/1TFgVG9chwy8Vzk0dondv1cUDlhF8MNIF/view?usp=sharing Delta Drill Press Manual] - Metal Shop | *[https://drive.google.com/file/d/1TFgVG9chwy8Vzk0dondv1cUDlhF8MNIF/view?usp=sharing Delta Drill Press Manual] - Metal Shop | ||
= | =Safety= | ||
==All Drill Presses== | |||
===All Drill Presses=== | |||
#Adjusting Table Height | #Adjusting Table Height | ||
##Loosen Lock Lever on left side | ##Loosen Lock Lever on left side | ||
| Line 35: | Line 38: | ||
#Secure your workpiece as appropriate | #Secure your workpiece as appropriate | ||
==Powermatic PM2800B== | |||
===Powermatic PM2800B=== | |||
Adjusting Drill Speed | Adjusting Drill Speed | ||
#Turn on drill | #Turn on drill | ||
#Use crank on left of drill to set speed | #Use crank on left of drill to set speed | ||
#Speed is displayed on digital display | |||
#'''DO NOT ADJUST DRILL SPEED UNLESS DRILL IS RUNNING''' | |||
==Delta Drill Presses== | ===Delta Drill Presses=== | ||
Adjusting Drill Speed | Adjusting Drill Speed | ||
#Unplug the machine | #Unplug the machine | ||
| Line 50: | Line 55: | ||
#Reposition belts according to the chart on the inner lid to get your desired RPM | #Reposition belts according to the chart on the inner lid to get your desired RPM | ||
##Make sure each belt is on the correct position on both pulleys. The belt should not be diagonal, but should be straight across. | ##Make sure each belt is on the correct position on both pulleys. The belt should not be diagonal, but should be straight across. | ||
#Rotate motor adjustment lever away from you, tightening the belt. It will stop rotating at one point, | #Rotate motor adjustment lever away from you, tightening the belt. It will stop rotating at one point, | ||
=Helpful Videos= | ==Helpful Videos== | ||
*[https://www.youtube.com/watch?v=Gq8jL_ZDjNM Drill Press Basics - WOOD] | *[https://www.youtube.com/watch?v=Gq8jL_ZDjNM Drill Press Basics - WOOD] | ||
*[https://www.youtube.com/watch?v=a_rl3S-QO3Y Common Metal Shop Tools: Drill Press] | *[https://www.youtube.com/watch?v=a_rl3S-QO3Y Common Metal Shop Tools: Drill Press] | ||
=Maintenance= | ==Maintenance== | ||
[[Category: Tool]] | [[Category: Tool]] | ||
[[Category: Wood Shop]] | [[Category: Wood Shop]] | ||
[[Category: Safety Checkout]] | [[Category: Safety Checkout]] | ||
Latest revision as of 11:25, 20 July 2023
About our machines
We have 2 drill presses for our Wood Shop and Metal Shop. One is just for wood, the other just for metal, to help keep the oily metal chips and wood chips separated.
Wood Shop Drill Press:
- Model: Powermatic PM2800B
Metal Shop Drill Press:
- Model: Delta 17-965
Guides and Manuals
- Powermatic Drill Press Manual - Wood Shop
- Powermatic PM2800B Safety Video #1 - required to watch before operating
- Powermatic PM2800B Safety Video #2 - required to watch before operating
- Delta Drill Press Manual - Metal Shop
Safety
All Drill Presses
- Adjusting Table Height
- Loosen Lock Lever on left side
- Crank handle on right side to desired height
- Tighten Lock Lever
- Mounting Drill Bit in chuck
- Tighten Bit with chuck key
- Turn on drill to make sure it is centered
- Determining Drill Speed
- Refer to laminated chart to find proper speed based on
- Type of drill bit
- Diameter of drill bit
- Type of material being drilled
- Refer to laminated chart to find proper speed based on
- Secure your workpiece as appropriate
Powermatic PM2800B
Adjusting Drill Speed
- Turn on drill
- Use crank on left of drill to set speed
- Speed is displayed on digital display
- DO NOT ADJUST DRILL SPEED UNLESS DRILL IS RUNNING
Delta Drill Presses
Adjusting Drill Speed
- Unplug the machine
- Open the top cover
- Loosen motor adjustment screws on left and right side of machine
- Rotate motor adjustment lever towards you, which slides the motor and creates slack in the belts
- Reposition belts according to the chart on the inner lid to get your desired RPM
- Make sure each belt is on the correct position on both pulleys. The belt should not be diagonal, but should be straight across.
- Rotate motor adjustment lever away from you, tightening the belt. It will stop rotating at one point,