Difference between revisions of "Plasma Cutter"
Jump to navigation
Jump to search
(added notes on maintenance, fixed header formatting to be level 2 "==" instead of level 1 (which is standard practice, shouldn't use level 1 headers anywhere)) |
m (AlexN moved page Plasma Cutters to Plasma Cutter: just one manual plasma cutter now) |
(No difference)
| |
Latest revision as of 14:27, 4 October 2024
About our machine
- Model: FDS CUT50
- Power: 220V
- Needs to be connected to compressed air to operate
Guides and Manuals
Safety
- Eye protection: Shade 9-12 (depending on intensity of arc)
- Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!)
- Clear the area of all flammables
- Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge
Helpful Videos
Maintenance
- The consumables may need replacing after using for awhile. There are 4 components that wear out:
- The ceramic cup
- The metal electrode
- The metal contact tip
- The ceramic ring