Difference between revisions of "JET Spindle Sander"
Jump to navigation
Jump to search
m |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File: | [[File:JetSpindleSander.jpg|400px|thumb]] | ||
=About our machine= | =About our machine= | ||
*Model: JET JOSS-S | *Model: JET JOSS-S | ||
*Spindle | *Spindle diameters: 4", 3", 2", 1-1/2", 1", 3/4", 5/8", 1/2", 3/8", 1/4" | ||
*Spindle length: 6" | |||
=Guides and Manuals= | =Guides and Manuals= | ||
| Line 9: | Line 10: | ||
=General Tips and Safety= | =General Tips and Safety= | ||
* | *Before changing spindles, unplug the machine | ||
*Ensure the right combination of parts are used when changing spindles | |||
*Ask for help or read the manual if things are not working right | |||
*Clean the spindle with the rubber stick periodically as you are working and when you are finished. | |||
*When you are done: Clean the spindle, turn off the machine, sweep up around the machine; and throw away any scraps. | |||
=Helpful Videos= | =Helpful Videos= | ||
| Line 17: | Line 22: | ||
*Periodically apply a light coat of paste wax or other protectant to the table top to prevent rusting. | *Periodically apply a light coat of paste wax or other protectant to the table top to prevent rusting. | ||
*Clean the sander after each use. Vacuum any residual dust inside the cabinet and around spindle area. | *Clean the sander after each use. Vacuum any residual dust inside the cabinet and around spindle area. | ||
Parts: | Parts: | ||
Latest revision as of 14:47, 4 February 2025
About our machine
- Model: JET JOSS-S
- Spindle diameters: 4", 3", 2", 1-1/2", 1", 3/4", 5/8", 1/2", 3/8", 1/4"
- Spindle length: 6"
Guides and Manuals
General Tips and Safety
- Before changing spindles, unplug the machine
- Ensure the right combination of parts are used when changing spindles
- Ask for help or read the manual if things are not working right
- Clean the spindle with the rubber stick periodically as you are working and when you are finished.
- When you are done: Clean the spindle, turn off the machine, sweep up around the machine; and throw away any scraps.
Helpful Videos
- JET Oscillating Spindle Sander - JOSS-S (Overview)
Maintenance
- Periodically apply a light coat of paste wax or other protectant to the table top to prevent rusting.
- Clean the sander after each use. Vacuum any residual dust inside the cabinet and around spindle area.
Parts: