Latest revision as of 12:03, 11 January 2024

This page talks about the various 3D Printers we have in our Electronics Lab.

Software

The following 4 pages are in this category, out of 4 total.

@@ Line 1: / Line 1: @@
-This page talks about the various 3D Printers we have in our [[Electronics Lab]], as well as basic instruction on how to set up a 3D print using our computers.
+This page talks about the various 3D Printers we have in our [[Electronics Lab]].
 =Software=
-*Simplify3D - used for most printers
+*Bambu Studio
-*Afinia - just for the Afinia H480
+*Cura - another option for preparing files to print
+*Chitubox - for the resin printers
 =Guides and Manuals=
-*[https://www.simplify3d.com/support/quick-start-guide/ Simplify3D Quick Start Guide]
-*[https://www.simplify3d.com/support/articles/ Simplify3D In-Depth Tutorials]
-*[https://www.simplify3d.com/support/videos/ Simplify3D Video Library]
-*[https://afinia.com/support/manuals-guides/ Afinia Manuals and Guides] - look for the H480 / H479
 =Helpful Videos=
-*[https://www.youtube.com/watch?v=NPEXGe1IPPE Running a simple print with Simplify3D] - memnarch1113 on Youtube
 [[Category: Tool]]
 [[Category: Electronics Lab]]