Latest revision as of 15:18, 8 October 2024

Rikon Wood Lathe

About our machine

VVV___REQUIRED SAFETY VIDEOS___VVV:

Members must watch these videos before using the lathe.

Important Safety Rules:

Remove any jewelry, roll up sleeves, and otherwise secure anything that could get wrapped up in the machine.
Position the tool rest as close as possible to the material without colliding.
After adjusting the tool rest, BEFORE TURNING IT ON spin the workpiece by hand to make sure it will not collide.
Safety eye wear required. Faceshields are highly recommended. Safety glasses are okay, but less effective.
Always use sharp tools! Dull tools cause chip-out, but more importantly can get caught on your material.
Avoid using materials that may break apart. Split wood, laminated materials, rotted pieces, etc.

General Tips

Parts:

@@ Line 3: / Line 3: @@
 *'''This tool requires a safety checkout'''
-Main Lathe
+====Main Lathe====
 *Model: Rikon 70-220VSR
 *Capacity: 12.5" x 43"
@@ Line 11: / Line 11: @@
 *Hole through spindle: 3/8"
-Chuck
+====Chuck====
 *Threads: 1 1/2" x 8 (use with adapter)
-Extra Lathes
-*Model: Delta 46-250
-**Capacity: 10" x 14.5"
-*Model: Central Machinery 65345
-**Capacity: 10" x 18"
-**Speeds: 950, 1100, 1600, 2200, 3200 rpm
 =Guides and Manuals=
@@ Line 28: / Line 21: @@
 Members must watch these videos before using the lathe.
-*[https://youtu.be/7yhkeUP6Mf8 Woodworking Tips & Techniques - Lathe Safety]
+*[https://youtu.be/7yhkeUP6Mf8 Woodworking Tips & Techniques - Lathe Safety] (3 min)
-*[https://youtu.be/YybjAs5T_r8 10 Common Wood Turning Mistakes]
+*[https://youtu.be/YybjAs5T_r8 10 Common Wood Turning Mistakes] (14 min)
-*[https://youtu.be/YVD0DLCGLCo Woodturning - Beginners Guide Revisited #1 - The Spindle Roughing Gouge]
+*[https://youtu.be/YVD0DLCGLCo Woodturning - Beginners Guide Revisited #1 - The Spindle Roughing Gouge] (12 min)
@@ Line 55: / Line 48: @@
 Parts:
+*
-{{:MainMenu}}
 [[Category: Tool]]
 [[Category: Wood Shop]]
 [[Category: Safety Checkout]]