Difference between revisions of "Revopoint Mini Handheld 3D Scanner"
Jump to navigation
Jump to search
MarthaBoyd (talk | contribs) (Created blank page) |
MarthaBoyd (talk | contribs) |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:Revopoint Mini 3D Handheld Scanner.jpg|thumb|Revopoint Mini 3D Handheld Scanner]] | |||
=About our Machine= | |||
'''Machine Info''' | |||
*Manufacturer: Revopoint | |||
*Model: Mini | |||
*Software | |||
**[https://www.revopint3d.com/download Revo Scan] | |||
=Guides and Manuals= | |||
*[https://drive.google.com/file/d/16XpFam4dKDAbp9QcwpX3_ovvz0ICOzyW/view?usp=drive_link Revopoint Mini Handheld 3D Scanner Start Guide] | |||
*[https://drive.google.com/file/d/1P1aBZFmOExswkIAC0WcjsvMDQTzT07ry/view?usp=drive_link Revopoint Mini 3D Tutorials and Tips] | |||
=General Tips and Safety= | |||
*Do not allow the scanner to come into contact with or become immersed in water or other liquids. If it gets wet, wipe them dry with a soft, absorbent cloth. Operating a scanner that has fallen in water may cause permanent component damage. | |||
*Handle the scanner with care to avoid hitting the cameras. | |||
*The operating temperature MINI of this product is 0°C to 40°C (32°F to 104°F). | |||
*Do not take apart the scanner. If there are any problems or questions,contact the Revopoint customer service team at customer@revopoint3d.com. | |||
=Helpful Videos/Links= | |||
*[https://www.youtube.com/watch?v=C8H5215AnUk The Revopoint MINI 3D Scanner - Unboxing, Setup and How To Scan] | |||
=Maintenance= | |||
*Keep the cameras (the two Depth cameras and one RGB camera) and the projector clean. Use 95% isopropyl alcohol and a soft cloth to clean them. | |||
[[Category: Tool]] | |||
[[Category: Electronics Lab]] | |||
[[Category: 3D Printers]] | |||
[[Category: Safety Checkout]] | |||
Latest revision as of 12:33, 28 February 2025
About our Machine
Machine Info
- Manufacturer: Revopoint
- Model: Mini
- Software
Guides and Manuals
General Tips and Safety
- Do not allow the scanner to come into contact with or become immersed in water or other liquids. If it gets wet, wipe them dry with a soft, absorbent cloth. Operating a scanner that has fallen in water may cause permanent component damage.
- Handle the scanner with care to avoid hitting the cameras.
- The operating temperature MINI of this product is 0°C to 40°C (32°F to 104°F).
- Do not take apart the scanner. If there are any problems or questions,contact the Revopoint customer service team at customer@revopoint3d.com.
Helpful Videos/Links
Maintenance
- Keep the cameras (the two Depth cameras and one RGB camera) and the projector clean. Use 95% isopropyl alcohol and a soft cloth to clean them.