Difference between revisions of "Rikon Wood Lathe"
Jump to navigation
Jump to search
m |
|||
| Line 3: | Line 3: | ||
*'''This tool requires a safety checkout''' | *'''This tool requires a safety checkout''' | ||
===Main Lathe=== | ====Main Lathe==== | ||
*Model: Rikon 70-220VSR | *Model: Rikon 70-220VSR | ||
*Capacity: 12.5" x 43" | *Capacity: 12.5" x 43" | ||
| Line 11: | Line 11: | ||
*Hole through spindle: 3/8" | *Hole through spindle: 3/8" | ||
===Chuck=== | ====Chuck==== | ||
*Threads: 1 1/2" x 8 (use with adapter) | *Threads: 1 1/2" x 8 (use with adapter) | ||
Latest revision as of 15:18, 8 October 2024
About our machine
- This tool requires a safety checkout
Main Lathe
- Model: Rikon 70-220VSR
- Capacity: 12.5" x 43"
- Speeds: 250 to 3,850 rpm
- Spindle: 1"x8TPI
- Spindle Taper: MT2
- Hole through spindle: 3/8"
Chuck
- Threads: 1 1/2" x 8 (use with adapter)
Guides and Manuals
General Tips and Safety
VVV___REQUIRED SAFETY VIDEOS___VVV:
Members must watch these videos before using the lathe.
- Woodworking Tips & Techniques - Lathe Safety (3 min)
- 10 Common Wood Turning Mistakes (14 min)
- Woodturning - Beginners Guide Revisited #1 - The Spindle Roughing Gouge (12 min)
Important Safety Rules:
- Remove any jewelry, roll up sleeves, and otherwise secure anything that could get wrapped up in the machine.
- Position the tool rest as close as possible to the material without colliding.
- After adjusting the tool rest, BEFORE TURNING IT ON spin the workpiece by hand to make sure it will not collide.
- Safety eye wear required. Faceshields are highly recommended. Safety glasses are okay, but less effective.
- Always use sharp tools! Dull tools cause chip-out, but more importantly can get caught on your material.
- Avoid using materials that may break apart. Split wood, laminated materials, rotted pieces, etc.
General Tips
- Wear an apron or smock. Turning gets pretty messy.
Helpful Videos
- Understanding a Starter Set of Lathe Chisels | Woodworkers Guild of America - WoodWorkers Guild Of America on Youtube
- Spindle Turning Safety for the Wood Lathe - WYOMINGWOODTURNER on Youtube
Maintenance
Parts: