Difference between revisions of "32 inch Hand Shear"
Jump to navigation
Jump to search
(→Guide) |
|||
| Line 29: | Line 29: | ||
*'''BEWARE''' of pinch points on the shear where your fingers can get caught. | *'''BEWARE''' of pinch points on the shear where your fingers can get caught. | ||
*'''USE GLOVES'''. Cut sheet metal will be razor sharp!! | *'''USE GLOVES'''. Cut sheet metal will be razor sharp!! | ||
*'''GO SLOW'''. The shear will have a tendency to bite and suck the sheet in | *'''GO SLOW'''. The shear will have a tendency to bite and suck the sheet in and cut a curve. | ||
and cut a curve. | |||
Revision as of 18:09, 15 December 2018
Model#: HS-800
Acquired from Bolton Group (product page here)
Bed width: 31 1/2""
Maximum shear mild steel thickness: 16 gauge
Packing size: 44" x 11.8" x 29.2"
Demo Video: Bolton Tools - HS-800 - 32" Hand Shear
Guide
PLEASE READ BEFORE USING
This tool is strictly for cutting the following materials:
- Aluminum, Brass, Copper sheet - 18 gauge - 0.05 inch
- Mild steel sheet - 18 gauge - 0.05 inch
This tool should NOT be used to cut the following:
- Material thicker than 18 gauge
- Bar stock, round tubing, or anything other than sheet
- Hardened or stainless steel sheet
Tips:
- You can use C clamps to clamp the sheet on the frame.
- BEWARE of pinch points on the shear where your fingers can get caught.
- USE GLOVES. Cut sheet metal will be razor sharp!!
- GO SLOW. The shear will have a tendency to bite and suck the sheet in and cut a curve.