Difference between revisions of "Forge"

From Port City Makerspace
Jump to navigation Jump to search
m
Line 35: Line 35:
{{:MainMenu}}
{{:MainMenu}}
[[Category: Tool]]
[[Category: Tool]]
[[Category: Safety Checkout]]
[[Category: Metal Shop]]

Revision as of 14:29, 24 October 2021

Forge.jpg

About our machine

  • Model: Custom built by Scott Winchester
  • Propane fuel with electric igniter
  • Stored on a cart with the Rolling Workbenches
  • For use outside ONLY

Guides and Manuals

General Tips and Safety

  • DO NOT USE BEFORE GETTING PERMISSION FROM EITHER THE GENERAL MANAGER OR SCOTT WINCHESTER
  • ONLY USE OUTSIDE
  • Wear appropriate clothing for hot work
    • All cotton or natural fiber clothing. SYNTHETIC CLOTHING WILL MELT TO YOUR SKIN.
    • Leather boots or shoes are preferred. NO OPEN TOED SHOES.
  • Wear appropriate safety gear
    • Safety glasses. A small piece of flying debris can cause a lot of damage.
    • Hearing protection. Hammering causes a loud ringing that can damage your hearing, and you will be doing a lot of hammering.
    • Thick leather gloves. These should be heavier than welding gloves. Note - the gloves do not permit you to directly hold hot metal, and only serve as a temporary barrier.
  • Treat all metal like it is hot metal! You can't tell just by looking if a piece of metal is hot enough to burn you. Always use the tongs for moving metal until it has fully cooled down.
  • Limit how much you travel with hot metal. Set up the forge next to your anvil so you don't have to walk to it.
  • NEVER FORGE COATED METALS (GALVANIZED, CHROME-PLATED, ETC). Never heat galvanized metal or metal with a bright finish in your forge. The fumes from these coatings are very TOXIC. Never forge galvanized or coated metals!

Helpful Videos

Maintenance

Parts:


Main Menu

General Spaces Tools Volunteer Instructors Community Communication

Main Website

Events Calendar

- - - - - -

Category:Spaces

Category:Tool

Category:Member Resources

Category:Projects

Category:Volunteer

Auto Shop

Bike Shop

Class Room

CNC Room

Electronics Lab

Metal Shop

Textiles Lab

Wood Shop

Category:Tool

Tool Manuals

MSDS Sheets

Category:Volunteer

Committees

Desk Volunteer Trello

Volunteer Log

Volunteer Manual

Category:Instructor

Instructor Handbook

Reimbursement Form - paper

Reimbursement Form - digital


Member Resources

Slack - member chat

PCMS Facebook Group

Helpful Links

Board of Directors

Committees

List of Forms

- - - - - -

Code of Conduct

Maintenance Request Form

Facility Issue Reporting Form

Entrance Survey

Feedback and Suggestions

Issue Reporting Form

Safety Checkout Form

Purchase Request Form