Difference between revisions of "Jointer"
Jump to navigation
Jump to search
m (Text replacement - "{{:MainMenu}}" to "") |
m (added tips and maintenance items) |
||
| Line 9: | Line 9: | ||
=General Tips and Safety= | =General Tips and Safety= | ||
* | *Use one or two pushblocks for small pieces and when appropriate | ||
*Before operating, check the depth setting and fence squareness | |||
*Set the cut depth to the lowest setting when jointing boards over 4" | |||
=Helpful Videos= | =Helpful Videos= | ||
| Line 16: | Line 18: | ||
=Maintenance= | =Maintenance= | ||
* | *Every use: clean dust off the machine's surface and moving parts | ||
*As needed: Steel surface should be coated with a thin layer of paste wax | |||
*As needed: Jointer knives need rotating to maintain a sharp cutting edge | |||
**After 3 rotations, the knives need to be sharpened or replaced | |||
Parts: | Parts: | ||
Latest revision as of 10:15, 25 January 2024
About our machine
- Model: Powermatic PJ-882HH
Guides and Manuals
General Tips and Safety
- Use one or two pushblocks for small pieces and when appropriate
- Before operating, check the depth setting and fence squareness
- Set the cut depth to the lowest setting when jointing boards over 4"
Helpful Videos
- How to Use a Jointer | Woodworking Howcast on Youtube
- Jointer Setup | The Wood Whisperer
Maintenance
- Every use: clean dust off the machine's surface and moving parts
- As needed: Steel surface should be coated with a thin layer of paste wax
- As needed: Jointer knives need rotating to maintain a sharp cutting edge
- After 3 rotations, the knives need to be sharpened or replaced
Parts: