Difference between revisions of "JET Spindle Sander"
Jump to navigation
Jump to search
m (added tips and safety points) |
|||
| Line 13: | Line 13: | ||
*Ensure the right combination of parts are used when changing spindles | *Ensure the right combination of parts are used when changing spindles | ||
*Ask for help or read the manual if things are not working right | *Ask for help or read the manual if things are not working right | ||
*Clean the spindle with the rubber stick periodically as you are working and when you are finished. | |||
*When you are done: Clean the spindle, turn off the machine, sweep up around the machine; and throw away any scraps. | |||
=Helpful Videos= | =Helpful Videos= | ||
Latest revision as of 14:47, 4 February 2025
About our machine
- Model: JET JOSS-S
- Spindle diameters: 4", 3", 2", 1-1/2", 1", 3/4", 5/8", 1/2", 3/8", 1/4"
- Spindle length: 6"
Guides and Manuals
General Tips and Safety
- Before changing spindles, unplug the machine
- Ensure the right combination of parts are used when changing spindles
- Ask for help or read the manual if things are not working right
- Clean the spindle with the rubber stick periodically as you are working and when you are finished.
- When you are done: Clean the spindle, turn off the machine, sweep up around the machine; and throw away any scraps.
Helpful Videos
- JET Oscillating Spindle Sander - JOSS-S (Overview)
Maintenance
- Periodically apply a light coat of paste wax or other protectant to the table top to prevent rusting.
- Clean the sander after each use. Vacuum any residual dust inside the cabinet and around spindle area.
Parts: