Plasma Cutter

From Port City Makerspace
Revision as of 11:36, 20 July 2023 by AlexN (talk | contribs) (added notes on maintenance, fixed header formatting to be level 2 "==" instead of level 1 (which is standard practice, shouldn't use level 1 headers anywhere))
Jump to navigation Jump to search
Plasmacuttercut50.jpg

About our machine

  • Model: FDS CUT50
  • Power: 220V
  • Needs to be connected to compressed air to operate

Guides and Manuals


Safety

  • Eye protection: Shade 9-12 (depending on intensity of arc)
  • Wear protective clothing: leather gloves, leather apron, cotton clothing. (no polyester/synthetics!)
  • Clear the area of all flammables
  • Avoid "blowback", which happens from either moving too fast or cutting in the middle of a workpiece rather than the edge

Helpful Videos

Maintenance

  • The consumables may need replacing after using for awhile. There are 4 components that wear out:
    • The ceramic cup
    • The metal electrode
    • The metal contact tip
    • The ceramic ring


Replacement Parts

Retrieved from "https://www.portcitymakerspace.com/wiki/index.php?title=Plasma_Cutter&oldid=3611"