About our machine

Model: Powermatic 209HH
Acquired through fundraising and a matching grant from the Guild of NH Woodworkers!

Rules

NO RECLAIMED LUMBER IN THIS PLANER. Talk to the General Manager or Wood Shop Manager about using the portable Dewalt planer we have set aside for this.
DO NOT RUN NAILS, STAPLES, OR ANY NON-WOOD OBJECTS THROUGH THIS PLANER
EPOXY: Be absolutely sure it is cured. Empty dust collector before and after to avoid contaminating the contents. Check for residue and clean with isopropyl afterwards.
If you put excessive wear on the blades you will be expected to pay for sharpening or new blades.
Take light passes on harder woods (1/4 turn)

Connect the dust collection hose
Set the height of the table. Your board should pass just underneath the metal plate in the middle
If your board is particularly long, set up support rollers on the infeed and outfeed sides to match the current height
Turn the dust collector on
Turn the planer on
Feed your board in straight until the rollers grab it and start to pull it
Move towards the outfeed side to support the end of it as it comes out
Once the board has exited the planer, carry it back to the in feed, adjust the height either an eight of a turn or a quarter of a turn
Make another pass, and repeat steps 6 through 8 until the board is the desired thickness
Turn off the planer and dust collector. Sweep up any chips around the planer. You can leave the dust collection hose connected

Inspect your board for knots or loose pieces that could come flying out. Remove them before sending through the planer.
If a workpiece is jammed, it may be because your board is not perfectly flat. Try taking a lighter pass. For more severely distorted boards flatten the board out on one side first.

Parts:

Main Menu

General	Spaces	Tools	Volunteer	Instructors	Community	Communication
Main Website Events Calendar - - - - - - Category:Spaces Category:Tool Category:Member Resources Category:Projects Category:Volunteer	Auto Shop Bike Shop Class Room CNC Room Electronics Lab Metal Shop Textiles Lab Wood Shop	Category:Tool Tool Manuals MSDS Sheets	Category:Volunteer Committees Desk Volunteer Trello Volunteer Log Volunteer Manual	Category:Instructor Instructor Handbook Reimbursement Form - paper Reimbursement Form - digital	Member Resources Slack - member chat PCMS Facebook Group Helpful Links	Board of Directors Committees List of Forms - - - - - - Code of Conduct Maintenance Request Form Facility Issue Reporting Form Entrance Survey Feedback and Suggestions Issue Reporting Form Safety Checkout Form Purchase Request Form