File:Lulzbottazpro.jpg

Size of this preview: 800 × 600 pixels. Other resolution: 2,560 × 1,920 pixels.

Original file ‎(2,560 × 1,920 pixels, file size: 1.49 MB, MIME type: image/jpeg)

Photo of the Lulzbot Taz Pro 3D printer

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	08:25, 16 October 2021		2,560 × 1,920 (1.49 MB)	AlexN (talk \| contribs)

You cannot overwrite this file.

There are no pages that use this file.

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera model	LG-M210
Camera manufacturer	LG Electronics
F Number	f/2.2
Lens focal length	3.51 mm
Date and time of data generation	20:50, 11 August 2021
ISO speed rating	150
Exposure time	1/15 sec (0.066666666666667)
Altitude	0 meters above sea level
File change date and time	20:50, 11 August 2021
Y and C positioning	Centered
Vertical resolution	72 dpi
Orientation	Normal
Horizontal resolution	72 dpi
Color space	sRGB
Date and time of digitizing	20:50, 11 August 2021
APEX aperture	2.27
Exposure mode	Auto exposure
DateTimeDigitized subseconds	391638
Scene capture type	Standard
Scene type	A directly photographed image
DateTimeOriginal subseconds	391638
Digital zoom ratio	1
Exposure Program	Not defined
White balance	Auto white balance
DateTime subseconds	391638
APEX shutter speed	3.906
Metering mode	Center weighted average
User comments	FC111111111
Meaning of each component	Y Cb Cr does not exist
Exif version	2.2
Flash	Flash did not fire, compulsory flash suppression
APEX exposure bias	0
APEX brightness	0
Sensing method	One-chip color area sensor
Supported Flashpix version	1