Router Table
Jump to navigation
Jump to search
About our machine
This Router Table was a group project built and designed by Paul Boeckman and Christiana Arsenault, with assistance of other members. Built in 2019.
Guides and Manuals
General Tips and Safety
- Vacuum: attaches to port in front of table
- Ring size: make as large as possible for best suction, but small enough so your workpiece won’t fall in
- Adjusting height: check the Lock before adjusting
- Power: the switch is on the underside on the right
- Collet: it has a double-lock. When loosening, it will get loose, then tight again, then loose.
- Common Courtesy: Clean up, remove router bit, leave router raised
Helpful Videos
Tooling
Maintenance
Parts: