Talk:Shapeoko 3
Revision as of 11:52, 15 September 2023 by AlexN (talk | contribs) (Created page with " == Stepper issue 09-15 == Ordered replacement pair of stepper motors for the Y-axis. The left motor seems to be sputtering. Did the cable swap test and it remained on that motor, so it is either the motor or wiring. I am betting it is the motor, there is a lot of rust on the outside of it, possibly from being stored in a basement prior to it being donated to us. If it is the wiring we can likely acquire some 18ga-4 conductor cable from Ricci. Found info on the parts a...")
Stepper issue 09-15
Ordered replacement pair of stepper motors for the Y-axis. The left motor seems to be sputtering. Did the cable swap test and it remained on that motor, so it is either the motor or wiring. I am betting it is the motor, there is a lot of rust on the outside of it, possibly from being stored in a basement prior to it being donated to us. If it is the wiring we can likely acquire some 18ga-4 conductor cable from Ricci.
Found info on the parts and specs here: https://web.archive.org/web/20170101012240/http://www.shapeoko.com/wiki/index.php/Parts#Motors