Difference between revisions of "Resaw Bandsaw"
Jump to navigation
Jump to search
m |
m |
||
| Line 3: | Line 3: | ||
=About our machine= | =About our machine= | ||
*Model#: B600A | *Model#: B600A | ||
*Blade: | *Blade: 111" by 3" .75 TPI | ||
*Max cutting height: 11.8" (300mm) | |||
*Max cutting width (with guide): 10.24" (260mm) | |||
*Owned by Oden Torres | *Owned by Oden Torres | ||
*This is the perfect machine for cutting veneer or slicing large lumber into thinner boards. | *This is the perfect machine for cutting veneer or slicing large lumber into thinner boards. | ||
*You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out. | *You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out. | ||
*[https://drive.google.com/file/d/1xngoidGIZKXxIVT3NaIpQmJglmOKQ6d6/view?usp=sharing Hitachi Resaw Manual] | |||
For reference: | For reference: | ||
Revision as of 15:13, 4 January 2022
About our machine
- Model#: B600A
- Blade: 111" by 3" .75 TPI
- Max cutting height: 11.8" (300mm)
- Max cutting width (with guide): 10.24" (260mm)
- Owned by Oden Torres
- This is the perfect machine for cutting veneer or slicing large lumber into thinner boards.
- You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out.
- Hitachi Resaw Manual
For reference:
- Blades cost $175 (acetool.com)
- Motor costs $250
Important Notes
- The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck.
- Be very careful when pushing through. It has a very fast cutting rate, and dense spots or knots can cause it to jump after pushing through.
- Round logs should have a flat on the bottom so they are stable.
- Round logs can also be secured to a sled with screws.
- DO NOT CUT RECLAIMED LUMBER OF ANY METALS JUST LIKE THE REST OF OUR SAWS.
- DO NOT ADJUST THE TENSION, GUIDES, OR BLADE. Ask Oden if you think any adjustment is needed. It more than likely does not.
Approved Users
- Oden T
- Alex N - 11/10/2019
- Peter B - 11/10/2019
- Jeff H - 11/10/2019
- Jeff G - 11/10/2019
- Paul B - 11/10/2019
- Elliot S - 11/10/2019
- Neil R - 11/10/2019
- Jeff L - 11/12/2019
- Jay S - 11/12/2019
- Ben P - 11/30/2019
- Viktor S - 1/5/2020
- John L - 1/14/2020
- Tim W - 2/6/2020
- Rob L - 2/16/2020
- Chris S - 3/17/2020
- Tanya H - 7/14/2020
- Patricia M - 7/30/2020
- Rob S - 7/30/2020
- Emma S - 10/28/2020
- Samuel L - 2/20/2021
- Brian O - 2/20/2021
Main Menu
| General | Spaces | Tools | Volunteer | Instructors | Community | Communication |
|
- - - - - - |
Reimbursement Form - paper Reimbursement Form - digital
|
Slack - member chat |
- - - - - - |