Difference between revisions of "Vertical Metal Bandsaw"
Jump to navigation
Jump to search
m (Text replacement - "{{:MainMenu}}" to "") |
m |
||
| Line 10: | Line 10: | ||
[[File:Vertical Bandsaw - Suggested Speeds and Blades.png|400px|thumb]] | [[File:Vertical Bandsaw - Suggested Speeds and Blades.png|400px|thumb]] | ||
[[File:Vertical Bandsaw - Belt Positions for Blade Speeds.png|400px|thumb|Reference chart for adjusting the belts and pulleys]] | [[File:Vertical Bandsaw - Belt Positions for Blade Speeds.png|400px|thumb|Reference chart for adjusting the belts and pulleys]] | ||
'''Always use the charts on this page or in the manual to determine what is appropriate for your material.''' Improper selection of speed or blade can cause excessive wear on the blade and quickly dull the teeth. | *'''Always use the charts on this page or in the manual to determine what is appropriate for your material.''' Improper selection of speed or blade can cause excessive wear on the blade and quickly dull the teeth. | ||
=Helpful Videos= | =Helpful Videos= | ||
| Line 16: | Line 16: | ||
=Maintenance= | =Maintenance= | ||
* | *Every 1500-2000 hours of operation, the gear box oil needs to be changed. Takes 1 1/2 quarts of "heavy adhesive gear oil". | ||
Parts: | Parts: | ||
*Blade: | *Blade: 93 1/2" by 1/2" | ||
**4 TPI - ideal for aluminum and soft metals | |||
**10 TPI - ideal for thicker metals | |||
**14 TPI - middle ground | |||
**18 TPI - good for thin metals | |||
Revision as of 15:52, 13 August 2022
About our machine
- Model: Delta Rockwell 28-380
- 14 inch
Guides and Manuals
General Tips and Safety
- Always use the charts on this page or in the manual to determine what is appropriate for your material. Improper selection of speed or blade can cause excessive wear on the blade and quickly dull the teeth.
Helpful Videos
Maintenance
- Every 1500-2000 hours of operation, the gear box oil needs to be changed. Takes 1 1/2 quarts of "heavy adhesive gear oil".
Parts:
- Blade: 93 1/2" by 1/2"
- 4 TPI - ideal for aluminum and soft metals
- 10 TPI - ideal for thicker metals
- 14 TPI - middle ground
- 18 TPI - good for thin metals