Difference between revisions of "Resaw Bandsaw"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
=Important Notes= | =Important Notes= | ||
*The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck. | *The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck. | ||
*Be very careful when pushing through. It has a very fast cutting rate, and | *Be very careful when pushing through. It has a very fast cutting rate, and dense spots or knots can cause it to jump after pushing through. | ||
*Round logs should have a flat on the bottom so they are stable. | *Round logs should have a flat on the bottom so they are stable. | ||
*Round logs can also be secured to a sled with screws. | *Round logs can also be secured to a sled with screws. | ||
Revision as of 06:40, 29 October 2020
About our machine
- Model#: B600A
- Blade: 110" by 3" .75 TPI
- Owned by Oden Torres
- This is the perfect machine for cutting veneer or slicing large lumber into thinner boards.
- You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out.
For reference:
- Blades cost $175 (acetool.com)
- Motor costs $250
Important Notes
- The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck.
- Be very careful when pushing through. It has a very fast cutting rate, and dense spots or knots can cause it to jump after pushing through.
- Round logs should have a flat on the bottom so they are stable.
- Round logs can also be secured to a sled with screws.
- DO NOT CUT RECLAIMED LUMBER OF ANY METALS JUST LIKE THE REST OF OUR SAWS.
- DO NOT ADJUST THE TENSION, GUIDES, OR BLADE. Ask Oden if you think any adjustment is needed. It more than likely does not.
Approved Users
- Oden T
- Alex N - 11/10/2019
- Peter B - 11/10/2019
- Jeff H - 11/10/2019
- Jeff G - 11/10/2019
- Paul B - 11/10/2019
- Elliot S - 11/10/2019
- Neil R - 11/10/2019
- Jeff L - 11/12/2019
- Jay S - 11/12/2019
- Ben P - 11/30/2019
- Viktor S - 1/5/2020
- John L - 1/14/2020
- Tim W - 2/6/2020
- Rob L - 2/16/2020
- Chris S - 3/17/2020
- Tanya H - 7/14/2020
- Patricia M - 7/30/2020
- Rob S - 7/30/2020
- Emma S - 10/28/2020
Main Menu
| General | Spaces | Tools | Volunteer | Instructors | Community | Communication |
|
- - - - - - |
Reimbursement Form - paper Reimbursement Form - digital
|
Slack - member chat |
- - - - - - |