Resaw Bandsaw

About our machine

• Model#: B600A
• Blade: 111" by 3" .75 TPI
• Max cutting height: 11.8" (300mm)
• Max cutting width (with guide): 10.24" (260mm)
• Owned by Oden Torres
• This is the perfect machine for cutting veneer or slicing large lumber into thinner boards.
• You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out.
• Hitachi Resaw Manual

For reference:

• Blades cost $175 (acetool.com)
• Motor costs $250

Important Notes

• The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck.
• Be very careful when pushing through. It has a very fast cutting rate, and dense spots or knots can cause it to jump after pushing through.
• Round logs should have a flat on the bottom so they are stable.
• Round logs can also be secured to a sled with screws.
• DO NOT CUT RECLAIMED LUMBER OF ANY METALS JUST LIKE THE REST OF OUR SAWS.
• DO NOT ADJUST THE TENSION, GUIDES, OR BLADE. Ask Oden if you think any adjustment is needed. It more than likely does not.

Approved Users

• Oden T
• Alex N - 11/10/2019
• Peter B - 11/10/2019
• Jeff H - 11/10/2019
• Jeff G - 11/10/2019
• Paul B - 11/10/2019
• Elliot S - 11/10/2019
• Neil R - 11/10/2019
• Jeff L - 11/12/2019
• Jay S - 11/12/2019
• Ben P - 11/30/2019
• Viktor S - 1/5/2020
• John L - 1/14/2020
• Tim W - 2/6/2020
• Rob L - 2/16/2020
• Chris S - 3/17/2020
• Tanya H - 7/14/2020
• Patricia M - 7/30/2020
• Rob S - 7/30/2020
• Emma S - 10/28/2020
• Samuel L - 2/20/2021
• Brian O - 2/20/2021