Category:Wood Shop

Summary

The wood shop at Port City Makerspace has everything that an aspiring wood worker could hope for, and many old friends of the seasoned carpenter. Shop tools include a professional grade table saw, bandsaw, compound miter saw, a 15″ planer, a 8″ x 75″ jointer, drum sanders, and a full complement of hand tools. There is truly too much to list. It’s best to come by the shop and see for yourself!

Wood Shop User Guide

This is a list of rules and advice for using the wood shop. Consider this an addition to the Code of Conduct.

1. Vacuum up IMMEDIATELY after doing something. Clean as you go. Don't leave a bunch of messes to clean up later, or you will wind up missing messes that others will have to clean up.
2. Don't know where something should go? Either ask another member or put it back where you found it.
3. Please warn others near you before doing something noisy or messy.
4. When using sanders:
   1. Wear a dust mask
   2. Use any available vacuum attachment on the machine or tool
   3. Vacuum up the surrounding area afterwards. Remember that dust travels far.
5. If you're not sure what you're doing, either talk to someone or google it. ESPECIALLY with the table saw.
6. DO NOT USE any power tool you have not gotten checked out on. DO NOT assume you know how to safely use something you've barely used.
7. Do not do any of the following to or on the power tools:
   1. Leave things on them
   2. Hammer or work on them
   3. Get glue on them
   4. Get water on them
   5. Push them to their limits. We don't have a "Tool Replacement Budget", so don't break our only tools.
   6. Break something and then not tell anybody. If the next person that walks up to it doesn't know its broken, it can cause them to get hurt when they try to use it. Leave a note, tell the manager
8. If a bladed tool seems difficult to use, it is probably dull and needs to be sharpened/replaced. Notify the manager or shop volunteer.
9. Work with nice hardwoods from the store or trusted source. Avoid working with reclaimed wood, as it has splits, nails, staples, etc. that can cause harm to you or the machines.
10. If you're working on a project that requires precision, CHECK THE MACHINES. Most people use things as they are left, and may not necessarily set them up at a perfect 90 degree or 0 for you.
    1. You should also have your own blade and know how to change it out for the tool you are doing the precision work on. The blades that are generally on the machines are communal use and get a lot of use before we sharpen or replace them.

Tools

Large Power Tools

• Table saw - Steel City Table Saw
• Compound Miter Saw - Makita 12"
• Blue Bandsaw - Rikon 14"
• Drum Sander - SuperMax 19-38
• Drill Press - Delta
• Ridgid Spindle Sander - EB44240
• 15″ Planer - Bridgewood
• 4" x 48" Jointer - Reliant
• Big Dust Collector - Reliant
• Small Dust Collector (on table saw) - Delta

In Wood Shop 2

• Small Tablesaw - Microlux #80463
• Delta Scrollsaw
• Mortiser
• Small Gray Lathe - Delta MIDI
• Small Green Lathe - Central Machinery
• Delta Lathe
• Gray Pen Lathe

Hand Tools

• Pull Saws
• Chisels
• Cordless Drills
• Routers & Bits
• Orbital Sanders
• Hammers & Mallets
• Biscuit Cutter
• Numerous Clamps
• Pocket Screw Jig
• Variety of Measuring Instruments

Resources

Layout