About our machine

Model#: B600A
Blade: 111" by 3" .75 TPI
Max cutting height: 11.8" (300mm)
Max cutting width (with guide): 10.24" (260mm)
Owned by Oden Torres
This is the perfect machine for cutting veneer or slicing large lumber into thinner boards.
You must talk to Alex N, Oden T, or Jeff H to get access to this tool. It will be locked out, with the key available to those that get checked out.
Hitachi Resaw Manual

For reference:

Important Notes

The motor can burn out if it stalls. Shut off immediately if it stalls and/or the blade gets stuck.
Be very careful when pushing through. It has a very fast cutting rate, and dense spots or knots can cause it to jump after pushing through.
Round logs should have a flat on the bottom so they are stable.
Round logs can also be secured to a sled with screws.
DO NOT CUT RECLAIMED LUMBER OF ANY METALS JUST LIKE THE REST OF OUR SAWS.
DO NOT ADJUST THE TENSION, GUIDES, OR BLADE. Ask Oden if you think any adjustment is needed. It more than likely does not.